Seven Tips to Prevent Car Rust Paint toothpaste to temporarily prevent rust, etc.
Release time:
2022-07-28
Car rust is a common problem, but also our daily maintenance need to pay attention to the problem, the following to introduce you to some car maintenance tips.
Tip 1: alert to the small scars in the smallest place
The surface of the car paint often rust, in addition to the common collision, scratches, driving tires popped up small stones hit in the paint, will also make the paint surface appear a peeling small points, time will produce small rust spots. And these small scars because most in the inconspicuous place, easy to be ignored. Therefore, usually to regularly check the car body, engine hatch and body around, once found to be timely to the professional beauty store to deal with.
Tip 2: diligently check the humidity of the water easily accumulated
Vehicle driving, encountered rain and snow or road through the muddy waterlogged roads is inevitable, the bottom of the body and some other gaps and the floor of the car and other places are easy to accumulate sludge, such as car owners do not clean in time, which will allow moisture to hide. Therefore, for the inner and outer edges of the wheel hubs, doors, luggage compartments of the bottom corners, door keyholes and wiper racks of the activities of the parts and so on, should be frequently checked, at the same time, to keep the doors and the body of the various drain holes open, check the humidity of the interior coverings, such as carpets and so on, to prevent the floor parts of the rust.
Tip 3: soft paint surface sealing glaze
Some paint surface is soft vehicles, in the process of high-speed driving in the wind and sand particles hit in the car body may also cause fine blackmail marks. For this type of car, you can give the body to do glaze, it can form a net solid protective film, improve the hardness of the paint, the effect can be maintained for about a year. And the coating can also achieve a similar effect. In addition, the bottom of the vehicle can be chassis armor or sealing, which can protect the chassis acid rain, corrosion, so that the original protective layer is not easy to dry, fall off, but also to prevent driving in the chassis of the impact of small stones.
Tip 4: the best not to cover the car coat
Vehicles parked outdoors, if you meet the windy and rainy weather, the inner layer of the car coat will repeatedly beat the car paint, especially if the car coat is blown into the wind and sand, it will be in the body of the car to cut out countless small scratches, a long time will also cause the paint black. In addition, after the wind and sand do not directly with a duster or rag to clean up the sand on the body, and should be rinsed with water, also to prevent duster and rag on the sand scratches the paint.
Tip 5: Do-it-yourself treatment of small rust points
For some minor scratches or rust that have appeared on the body, if the owner leaves it easy to rust, but it is not worth spending to go to the auto beauty store. Then, car owners can do it themselves with some easy way to deal with.
Tip 6: Apply toothpaste can be temporary rust prevention
Use regular toothpaste for this. When you find a new small scratch, apply the toothpaste to the scratch by gently smearing it in a circle. Don't forget to reapply it after it rains or you wash your car. This will generally reduce the scratch marks and will also simply act as an insulator against rust, which is fine in the short term. The effect is most noticeable especially on white car paint.
Tip 7: Paint refinishing pen can deal with hostage marks
If the rust is not very serious, you can first use very fine water sandpaper dipped in water to gently grind away the rust spots, but do not grind without direction, to the same straight line grinding. When completely wiped clean, apply a layer of primer. If it is a new scratch, you can wipe clean and apply primer directly. After that, if the vehicle is equipped with a small can of factory paint, you can wait for the primer to dry, then use water sandpaper to smooth it out and apply the factory paint on top of the primer. If you don't have the original paint, you can purchase a touch-up pen and use it to apply the color treatment. This treatment is not as effective as going to a beauty store, but if it is a small or unobtrusive scar, it can also play a role in preventing the rust from expanding and aggravating.
Previous Page
Previous Page
Latest News
Latest News
Get Free Counseling

We are a high-tech enterprise specializing in the R&D, production, sales, and service of precision die-casting components and multi-slide die-casting equipment.
Contact

marketing@changyincast.com

Lamar Central, 3800 North Lamar Blvd., Suite 200, Austin, Texas, USA 78756
Copyright©2024 C&Y DIE CASTING L.L.C. All Rights Reserved.